€564.07 Price incl. VAT: €693.80
The Porotherm clay block system is a monolithic wall structure without cavity. Just one solid insulated wall. Use these poroton blocks for your external wall where the thermal performance is important. Used from DPC (damp-proof course) up to the roof plate level and for gables. Available block sizes (wall thickness): 240mm, 300mm, 365mm, 425mm, 490mm. All block sizes available with or without integrated mineral wool insulation.
Porotherm T8 300 mm External Insulated Poroton Building Block – 60/Pallet
External wall for bungalow or multi storey house. A minimum of 50mm external insulation is required to achieve the current building regulation (U-value 0.18W/m2K). 90mm external insulation will provide a passive U-value of 0.15W/m2K.
| Product Description | Porotherm T8 300 MW |
|---|---|
|
Dimension in mm (LxWxH)
|
248 x 300 x 249
|
|
Quantity/sqm
|
16
|
|
Quantity/pallet
|
60
|
|
Weight kg/each
|
12.1
|
|
Weight kg/pack
|
726
|
|
Conductivity Dry Block Lambda [W/mK]
|
0.08
|
|
Compressive strength
|
6 |
The Porotherm clay block is one of the best building materials and it is definitely the most sustainable and environmentally friendly solution for housing. The clay absorbs the heat from inside the building and regulates it during the day. This way you can maintain a steady, balanced temperature that will give you comfort without any additional energy source. No cavity, no draft, no trapped moister or mould….. just healthy living environment that is provided by the breathable Porotherm clay wall system.
If you are a DIY builder check out the new DryFix System HERE, a plain adhesive for an even faster and easier way. DryFix can be used in a wider range of weather conditions and gives you independence from the seasons.
Heat Loss Value
Note: If you need to do your own calculation please find the Lambda value for individual poroton blocks in their respective Declaration of Performance (DOP) Certificate under “Technical information”.
The results are based on a 1 mm parge coat, internal dab and slab finish, 15 mm of external render and
mineral wool insulation in the voids.
| Product | Insulation Type and Thickness | Provided U Value |
|---|---|---|
| Porotherm 300 T8 MW | – | 0.24W/m²K |
| Porotherm 300 T8 MW | 50mm EPS | 0.18W/m²K |
| Porotherm 300 T8 MW | 100mm EPS | 0.14W/m²K |
| Porotherm 300 T8 MW | 150mm EPS | 0.12W/m²K |
| Porotherm 300 T8 MW | 200mm EPS | 0.10W/m²K |
Heat Loss Value
Note: If you need to do your own calculation please find the Lambda value for individual poroton blocks in their respective Declaration of Performance (DOP) Certificate under “Technical information”.
The results are based on 10 mm of internal plaster, 15 mm external render and
mineral wool insulation in the voids.
mineral wool insulation in the voids.
| Product | Insulation Type and Thickness | Provided U Value |
|---|---|---|
| Porotherm 300 T8 MW | – | 0.25W/m²K |
| Porotherm 300 T8 MW | 50mm EPS | 0.19W/m²K |
| Porotherm 300 T8 MW | 100mm EPS | 0.15W/m²K |
| Porotherm 300 T8 MW | 150mm EPS | 0.12W/m²K |
You must be logged in to post a review.
Reviews
There are no reviews yet.