Porotherm in use

Facebook Posts

13 hours ago

Clayblock Ireland

nZEB?
In the EU across the continent approximately 90% of the houses (yes 90%!) are built with clay blocks!! All current regulations and building standards including thermal requirements are based on the performance of clay blocks. Lower U-values such as 0.18W/m2K for nZEB buildings are easily achievable with our Porotherm T7 MW 365 single leaf structure! No draught, no cold, no mould..... just a comfortable and healthy living environment at a low cost! Email your plans to office@clayblock.ie
... See MoreSee Less

View on Facebook

1 week ago

Clayblock Ireland

Concrete is cheap and ineffective, Porotherm is much better value! If you are going to build your home choose the right products. Consider Porotherm as a superior wall solution! Send your plan to office@clayblock.ie and we give you a free quotation. Alternatively you can call us on 0877745465 or visit our website www.clayblock.ie ... See MoreSee Less

View on Facebook

Porotherm in use

  • dsc_4031Thin bed mortar is a mix of fine-ground sand, cement and other ingredients specific to Porotherm® construction.
  • Mixed locally to laying, it allows for thin joints which will achieve full strength in just 24 hours
  • Unlike traditional mortar, which is often limited to use only when the temperature exceeds 3°C, our mortar can be used from 0°C, allowing block layers to minimise weather related delays
  • Each 15kg pack requires just 3.6 litres of water and will lay 1 no. pack of poroton blocks when applied with the correct rolling tools
  • A Roller to apply the thin bed mortar allows for the swift and simple creation of true 1mm bed joints.

Parge-coat

  • A high performance parge coat is an alternative to a wet plaster parge coat to provide an airtight barrier prior to the application of plasterboard on dabs or other internal finishes
  • Our parge coat is a modern high performance product,that has been specifically designed and tested for the fast application onto the Porotherm® walling systems. It has been engineered to increase airtightness and to optimise the sound and thermal performance of the system, prior toapplying finishes.
  • Our parge coat can be easily applied by brush or roller ensuring a fast, de-skilled applicationeco-parge-porotherm